131 hits for
Model "FLT" ... (all of these words)
in section "inlet" ...
| limit hits to section: | |||||||||
| hardware | engine | inlet | ignition | transmission | frame | exhaust | instruments | misc. | all |
| Order # ? | OEM # ? | Description | Finish | Origin | Price (EUR) | Export (EUR)? | |
| 27008-83A | 27008-83A | Compliance fitting - front cylinder head | usa | 13.00 | 10.92 | ||
| 27012-83A | 27012-83A | Compliance fitting, rear cylinder head | usa | 13.00 | 10.92 | ||
| 27018-85 | 27018-85 | Tube clamp - .75 ID | 2.00 | 1.68 | |||
| 27019-83 | 27019-83 | Intake manifold | usa | 30.00 | 25.21 | ||
| 27021-78 | 27021-78 | Manifold, intake | usa | 28.00 | 23.52 | ||
| 27023-71 | 27023-71 | Gasket, carb./manifold | 1.00 | 0.84 | |||
| 27025-90A | 27025-90A | Carburetor, HDI | japan | 395.00 | 331.93 | ||
| 27029-90 | 27029-90 | Carburetor, HDI | 395.00 | 331.93 | |||
| 27037-79 | 27037-79 | Nylon sleeve | 2.00 | 1.68 | |||
| 27039-90A | 27039-90A | Carburetor - federal | 475.00 | 399.15 | |||
| 27045-78 | 27045-78 | Choke shaft kit - shaft, washer,clip,screws,disc | japan | 28.00 | 23.52 | ||
| 27046-78 | 27046-78 | Plastic parts kit - springs, clips, washers, ball, choke lever | japan | 18.00 | 15.12 | ||
| 27060-55 | 27060-55 | Manifold seal / O-ring, solenoid mounting | rubber | 2.20 | 1.84 | ||
| R 27060-55 | 27060-55 | Manifold seal / O-ring, solenoid mounting | rubber | 0.70 | 0.58 | ||
| 27062-78 | 27062-78 | Seal, manifold to cylinder head | 3.50 | 2.94 | |||
| R 27062-78 | 27062-78 | Seal, manifold to cylinder head | usa | 3.00 | 2.52 | ||
| R 27063-80 | 27063-80 | Clamp, intake manifold | |||||
| 27063-80 | 27063-80 | Clamp, intake manifold | usa | 14.00 | 11.76 | ||
| 27066-85T | 27066-85T | Intake clamp, with seal "Eagle Iron" | 10.00 | 8.40 | |||
| 27079-84 | 27079-84 | Cap, evaporative port / overflow port | japan | 2.50 | 2.10 | ||
| 27130-81 | 27130-81 | Screw, throttle stop | 1.10 | 0.92 | |||
| 27136-81 | 27136-81 | Spring, throttle & idle screws | japan | 2.80 | 2.35 | ||
| 27137-81 | 27137-81 | Washer, throttle stop screw | 1.30 | 1.09 | |||
| 27139-81 | 27139-81 | Screw with washer, throttle cable bracket | 1.00 | 0.84 | |||
| 27141-81 | 27141-81 | Bracket - throttle cable | japan | 32.00 | 26.89 | ||
| 27142-81 | 27142-81 | Choke lever kit / Lever kit accelerator pump | japan | 24.00 | 20.16 | ||
| 27143-81 | 27143-81 | Lever kit, accelerator pump | japan | 25.00 | 21.00 | ||
| 27144-83 | 27144-83 | Choke lever kit | 20.00 | 16.80 | |||
| 27144-86A | 27144-86A | Choke lever kit | japan | 20.00 | 16.80 | ||
| 27145-81 | 27145-81 | Screw, fast idle | 0.80 | 0.67 | |||
| 27175-90 | 27175-90 | Needle | japan | 11.00 | 9.24 | ||
| 27176-90 | 27176-90 | Needle | japan | 11.00 | 9.24 | ||
| 27303-84 | 27303-84 | Main jet - 1.75 mm | japan | 10.00 | 8.40 | ||
| 27304-76 | 27304-76 | Screw, choke cable bracket | Keihin | japan | 1.00 | 0.84 | |
| 27306-76 | 27306-76 | Adjusting screw - pump stroke | Keihin | japan | 1.20 | 1.00 | |
| 27307-76 | 27307-76 | Screw, wire block | Keihin | japan | 1.00 | 0.84 | |
| 27308-76 | 27308-76 | Pin, float | Keihin | japan | 4.00 | 3.36 | |
| 27309-76 | 27309-76 | Screw, float pin | Keihin | japan | 1.00 | 0.84 | |
| 27311-76 | 27311-76 | Rubber boot, accelerator pump | Keihin | japan | 5.00 | 4.20 | |
| 27313-76 | 27313-76 | Screw, throttle stop | Keihin | japan | 6.00 | 5.04 | |
| 27314-76 | 27314-76 | Spring, throttle stop screw Keihin | Keihin | japan | 2.00 | 1.68 | |
| 27320-76 | 27320-76 | Screw, throttle cable bracket | Keihin | japan | 1.00 | 0.84 | |
| 27321-76 | 27321-76 | Bracket, throttle cable | Keihin | japan | 10.00 | 8.40 | |
| 27322-76 | 27322-76 | Spring, throttle lever (return) Keihin | Keihin | japan | 6.00 | 5.04 | |
| R 27322-76 | 27322-76 | Spring, throttle lever (return) Keihin | Keihin | 1.30 | 1.09 | ||
| 27324-83 | 27324-83 | O-ring, float bowl Keihin | 5.00 | 4.20 | |||
| 27325-83 | 27325-83 | Bracket, choke cable | japan | 8.00 | 6.72 | ||
| 27325-86 | 27325-86 | Bracket, choke cable | 7.00 | 5.88 | |||
| 27327-83 | 27327-83 | Bracket, throttle cable | japan | 32.00 | 26.89 | ||
| 27327-83A | 27327-83A | Bracket, throttle cable | japan | 35.00 | 29.41 | ||
| 27328-76 | 27328-76 | Throttle lever | Keihin | 27.00 | 22.68 | ||
| 27329-83 | 27329-83 | Low speed jet, 0.52 mm | 8.00 | 6.72 | |||
| 27330-83 | 27330-83 | Bowl (02 BH) | 02 BM?? | japan/usa | 55.00 | 46.21 | |
| 27333-76 | 27333-76 | Lockwasher / Spring washer, throttle lever | Keihin | 1.00 | 0.84 | ||
| 27335-76 | 27335-76 | Nut, throttle lever | Keihin | 1.80 | 1.51 | ||
| 27338-76 | 27338-76 | Clip, float valve | Keihin | 4.50 | 3.78 | ||
| 27340-90 | 27340-90 | Bracket, cable | japan | 42.00 | 35.29 | ||
| 27360-76 | 27360-76 | O-ring, pump accelerator Keihin | Keihin | 1.30 | 1.09 | ||
| 27362-76 | 27362-76 | Spring, diaphragm to lower housing | Keihin | japan | 2.00 | 1.68 | |
| 27366-76 | 27366-76 | Screw | Keihin | 1.00 | 0.84 | ||
| 27367-76 | 27367-76 | Screw | Keihin | 3.00 | 2.52 | ||
| 27368-76 | 27368-76 | Clip, overflow hose | Keihin | 1.30 | 1.09 | ||
| 27369-76 | 27369-76 | Hose, overflow | Keihin | 8.00 | 6.72 | ||
| 27370-83 | 27370-83 | Rod - accelerator pump | 4.00 | 3.36 | |||
| R 27371-76 | 27371-76 | Fitting - fuel hose | chrome | ||||
| 27371-76 | 27371-76 | Fitting - fuel hose | japan | 9.50 | 7.98 | ||
| 27373-76 | 27373-76 | Rod, accelerator pump (860B) 59.5mm | Keihin | japan | 5.00 | 4.20 | |
| 27385-76 | 27385-76 | Plug, low speed jet | Keihin | 3.80 | 3.19 | ||
| 27471-80A | 27471-80A | Carburetor (B88O) | 325.00 | 273.10 | |||
| 27494-81A | 27494-81A | Carburetor (B78F) | 445.00 | 373.94 | |||
| R 27751-69P | 27751-69P | Rubber cap, front stoplight switch / control coil adj. screw | 2.00 | 1.68 | |||
| 27882-78 | 27882-78 | Bracket, choke cable | japan | 7.70 | 6.47 | ||
| 27886-78A | 27886-78A | Float (needle) valve with clip | Keihin | japan | 26.00 | 21.84 | |
| 27887-78 | 27887-78 | Float | japan | 25.00 | 21.00 | ||
| 27889-78 | 27889-78 | O-ring, float bowl Keihin | japan | 8.00 | 6.72 | ||
| R 27889-78 | 27889-78 | O-ring, float bowl Keihin | 1.50 | 1.26 | |||
| 27890-78 | 27890-78 | Float chamber assy. / Bowl (B 78 A) | japan | 65.00 | 54.62 | ||
| 27891-78 | 27891-78 | Housing, accelerator pump | 14.00 | 11.76 | |||
| 27891-80 | 27891-80 | Housing, accelerator pump | japan | 16.00 | 13.44 | ||
| 27892-78 | 27892-78 | O-ring, low speed mixt. adj. screw | japan | 1.30 | 1.09 | ||
| 27895-78 | 27895-78 | Low speed jet 0.70 mm | japan | 9.00 | 7.56 | ||
| 27898-78 | 27898-78 | Main jet 1.65 mm (Std.) | 11.00 | 9.24 | |||
| 29027-80 | 29027-80 | Security wire, mtg. bolts 9 1/4" | 1.00 | 0.84 | |||
| 29057-78 | 29057-78 | Grill, air intake | 15.00 | 12.60 | |||
| 29057-78A | 29057-78A | Grill, air intake | 17.00 | 14.28 | |||
| 29058-77 | 29058-77 | Gasket, air cleaner to carburetor | 1.00 | 0.84 | |||
| R 29058-77 | 29058-77 | Gasket, air cleaner to carburetor | 0.50 | 0.42 | |||
| 29061-78 | 29061-78 | Cover, air cleaner | chrome | 95.00 | 79.83 | ||
| 29064-78 | 29064-78 | Baffle - filter cover | 25.00 | 21.00 | |||
| 29068-86 | 29068-86 | Baffle plate | 45.00 | 37.81 | |||
| 29071-79 | 29071-79 | Safety label, air cleaner / personal safety warning | 37.00 | 31.09 | |||
| 29092-77 | 29092-77 | Air scoop kit | chrome | ||||
| 29110-83 | 29110-83 | Bracket, air cleaner - rear | black | 8.00 | 6.72 | ||
| 29113-80 | 29113-80 | Choke bracket, rear | 5.00 | 4.20 | |||
| 29114-79A | 29114-79A | Choke bracket, front | zinc | 7.00 | 5.88 | ||
| 29114-80 | 29114-80 | Choke bracket, front | zinc | 5.00 | 4.20 | ||
| 29116-83 | 29116-83 | Bracket, air cleaner mounting | black | 45.00 | 37.81 | ||
| 29117-80 | 29117-80 | Bracket, lower | zinc | 6.00 | 5.04 | ||
| 29121-84 | 29121-84 | Cap, overflow | 1.00 | 0.84 | |||
| 29125-79 | 29125-79 | Bracket, with studs | 14.00 | 11.76 |
About the part numbers:
The number in the "Order #"-column is the number we need if you want to order the part.
The number in the "OEM #"-column is the "Original Equipment Manufacturer" number, the original part number.
From the Order number you can tell if it is an original or repro part: If the number begins with a letter it is a repro part. (usually a B for parts, an L for books, C for Colony kits, etc.)
Many items are listed without a price, this means they are in stock but you will have to ask for a price quote.
About Export price:
Price without sales tax, sales outside the EU