549 hits for
Model "Bobcat" ... (all of these words)
in section "all" ...
| limit hits to section: | |||||||||
| hardware | engine | inlet | ignition | transmission | frame | exhaust | instruments | misc. | all |
Pages : [<< prev] 1 2 3 4 5 6 [next >>]
| Order # ? | OEM # ? | Description | Finish | Origin | Price (EUR) | Export (EUR)? | |
| 23785-48 | 23785-48 | Oil seal, magneto shaft | |||||
| 23787-47A | 23787-47A | Gasket, oil seal / magneto, generator shaft seal | |||||
| 24811-53 | 24811-53 | Stud, crankcase to cylinder | |||||
| 25411-47 | 25411-47 | Gasket, clutch cover | usa | ||||
| 25451-47 | 25451-47 | Screw, clutch cover - front 3" | usa | 8.00 | 6.72 | ||
| 25453-47 | 25453-47 | Screw, clutch cover - center 2 5/16" | usa | 4.00 | 3.36 | ||
| 25705-47 | 25705-47 | Inspection cover | zinc | usa | 18.00 | 15.12 | |
| 25710-47A | 25710-47A | Gasket, inspection cover | usa | ||||
| 25715-47 | 25715-47 / 9851? | Zerk nipple, shift lever / spr.shaft nut/ front siren foot lever | usa | 2.00 | 1.68 | ||
| 27412-55 | 27412-55 | Insulating block | |||||
| 27413-55 | 27413-55 | Gasket, mounting | usa | ||||
| 27671-55 | 27671-55 | Spring, friction - choke shaft | Tillotson | 2.50 | 2.10 | ||
| 27672-55 | 27672-55 | Choke shaft & lever | usa | 48.00 | 40.33 | ||
| 27673-55 | 27673-55 | Choke shutter / choke disc | 3 pcs. | usa | 21.00 | 17.64 | |
| 27680-55 | 27680-55 | Float | usa | 40.00 | 33.61 | ||
| 27681-55 | 27681-55 | Pin, float lever | |||||
| 27683-55 | 27683-55 | Gasket, float bowl cover | 3.00 | 2.52 | |||
| 27688-55 | 27688-55 | Screw, idle mixture | |||||
| 27689-55 | 27689-55 | Spring, idle mixture screw | usa | 2.40 | 2.01 | ||
| 27692-60 | 27692-60 | Idle tube | usa | ||||
| 27693-55 | 27693-55 | Inlet needle, spring, seat & gasket | usa | 32.00 | 26.89 | ||
| 27694-55 | 27694-55 | Gasket, inlet seat | usa | 1.80 | 1.51 | ||
| 27699-55 | 27699-55 | Screw, main adjusting | usa | ||||
| 27700-55 | 27700-55 | Packing, main mixture screw | 1.00 | 0.84 | |||
| 27701-55 | 27701-55 | Nut, packing | usa | 13.00 | 10.92 | ||
| 27703-55 | 27703-55 | Gasket, nozzle / main plug | usa | 1.50 | 1.26 | ||
| 27706-57 | 27706-57 | Spring, throttle shaft | usa | 3.00 | 2.52 | ||
| 27707-57 | 27707-57 | Seal, throttle shaft | usa | 2.50 | 2.10 | ||
| 27708-55A | 27708-55A | Shaft, throttle | usa | 25.00 | 21.00 | ||
| 27709-55 | 27709-55 | Retaining clip, throttle shaft | usa | 2.00 | 1.68 | ||
| 27711-55 | 27711-55 | Throttle lever | usa | ||||
| 27714-55 | 27714-55 | Throttle disc / shutter | usa | 11.00 | 9.24 | ||
| 27715-55 | 27715-55 | Throttle wire block | 7.00 | 5.88 | |||
| 27716-55 | 27716-55 | Retaining clip, choke lever wire block | Tillotson | usa | 4.00 | 3.36 | |
| 27721-55 | 27721-55 | Gasket set | 22.00 | 18.48 | |||
| 29037-61 | 29037-61 | Element - air filter | usa | 40.00 | 33.61 | ||
| 29041-61 | 29041-61 | Gasket, carburetor flange | |||||
| 29539-55 | 29539-55 | Grommet, magneto cable | 5.00 | 4.20 | |||
| 29572-58 | 29572-58 | Magneto cam, inner | 25.00 | 21.00 | |||
| 29573-58 | 29573-58 | Magneto cam, outer | 25.00 | 21.00 | |||
| 29577-55 | 29577-55 | Magneto coil core clamp | 8.00 | 6.72 | |||
| 29580-55 | 29580-55 | Magneto breaker contact assy. | 35.00 | 29.41 | |||
| 29581-55 | 29581-55 | Magneto lockwasher - breaker terminal | |||||
| 29582-55 | 29582-55 | Nut, breaker terminal | |||||
| 29583-55 | 29583-55 | Washer, 3/16" x 3/8" x 1/32" | |||||
| 29584-55 | 29584-55 | Screw & lockwasher, 8-32 x 1/4" | |||||
| 29593-55 | 29593-55 | Screw, magneto contact point locking | |||||
| 29594-55 | 29594-55 | Lockwasher, magneto contact point locking screw | |||||
| 31610-53 | 31610-53 | Bracket, spark coil | 19.00 | 15.96 | |||
| 31620-47 | 31620-47 | Terminal, spark plug cable - use with solid core cables only | usa | 1.00 | 0.84 | ||
| 32301-47A | 32301-47A | Spark plug no. 4 14 mm | No. 4 | usa | 4.50 | 3.78 | |
| 32303-47A | 32303-47A | Spark plug no. 3 14 mm replaced by 32339-04 | No. 3 | usa | 4.50 | 3.78 | |
| 32305-48A | 32305-48A | Spark plug no. 2 14 mm | No. 2 | 5.50 | 4.62 | ||
| 32339-04 | 32339-04 | Spark plug, no. 3 replaces 32303-47A | 4.50 | 3.78 | |||
| 32342-42 | 32342-42 | Gasket, spark plug | usa | 2.00 | 1.68 | ||
| 32342-58 | 32342-58 | Gasket, spark plug | usa | 1.00 | 0.84 | ||
| 33064-47 | 33064-47 | Starter crank with rubber (36910-47) | usa | 55.00 | 46.21 | ||
| 33072-47 | 33072-47 | Rubber, starter crank (36915-47) | usa | 21.00 | 17.64 | ||
| 33508-47 | 33508-47 | Collar, ratchet spring (23561-47) | |||||
| 33530-47B | 33530-47B | Starter sector gear | 50.00 | 42.01 | |||
| 33534-47 | 33534-47 | Starter spring (23614-47) | usa | 18.00 | 15.12 | ||
| 33536-47 | 33536-47 | Spring plate (23616-47) | usa | ||||
| 33540-47 | 33540-47 | Starter shaft (23603-47) | usa | ||||
| 33542-47 | 33542-47 / 2307-36 | Thrust washer (23606-47) | usa | 7.00 | 5.88 | ||
| 33544-47 | 33544-47 | Shim, starter shaft (23608-47) | usa | ||||
| 34328-47 | 34328-47 | Ratchet | usa | 28.00 | 23.52 | ||
| 34345-47 | 34345-47 | Bracket, ratchet | usa | ||||
| 34348-47 | 34348-47 | Lockwasher, ratchet bracket | usa | ||||
| 34352-47 | 34352-47 | Collar, ratchet spring | usa | ||||
| 34353-53 | 34353-53 | Ratchet spring - with pin | usa | ||||
| 34363-47 | 34363-47 | Key, ratchet spring | usa | ||||
| 34381-47 | 34381-47 | Spring, ratchet ball | usa | ||||
| 34460-52 | 34460-52 | Oil seal, shifter and starter shafts | 3.00 | 2.52 | |||
| 34481-47 | 34481-47 | Spring, shifter pawl | usa | 5.00 | 4.20 | ||
| 34483-47 | 34483-47 | Shifter pawl spring cover | usa | ||||
| 34600-54 | 34600-54 | Shift foot lever / Shifter lever, with rubber | zinc | usa | 55.00 | 46.21 | |
| 34606-54A | 34606-54A | Shifter lever, without cover / rubber | zinc | usa | 45.00 | 37.81 | |
| R 34609-52 | 34609-52 | Shifter rubber & stud 3/4" stud | black | 4.00 | 3.36 | ||
| 34609-52T | 34609-52T | Shifter rubber & stud 3/4" stud "Eagle Iron" | black | 6.00 | 5.04 | ||
| 34609-61 | 34609-61 | Shifter rubber & stud (short) | white | 10.00 | 8.40 | ||
| 35045-52A | 35045-52A | Mainshaft | usa | 135.00 | 113.44 | ||
| 35051-47 | 35051-47 | Main drive gear - 28 T (optional on BTH) | usa | 95.00 | 79.83 | ||
| 35051-53A | 35051-53A | Gear, main drive - 26 T | usa | 110.00 | 92.43 | ||
| 35056-55 | 35056-55 | Sliding gear, mainshaft - 21 T | usa | 105.00 | 88.23 | ||
| 35079-47 | 35079-47 | Retaining ring - outer | usa | ||||
| 35080-47 | 35080-47 | Retaining ring - inner | usa | ||||
| 35150-47 | 35150-47 | Oil seal - main gear | usa | ||||
| 35165-47 | 35165-47 | Collar, main gear | usa | ||||
| 35170-47A | 35170-47A | Gasket, oil seal | usa | 2.00 | 1.68 | ||
| 35201-62 | 35201-62 | 12 T mainshaft sprocket - trail kit | |||||
| 35209-47 | 35209-47 | Nut and oil seal - sprocket | |||||
| 35222-62 | 35222-62 | Collar, mainshaft oil seal - use with 12 T sprocket | |||||
| 35611-47A | 35611-47A | Countershaft | usa | ||||
| 35675-52 | 35675-52 | Low gear, countershaft - 32 T | usa | ||||
| 35691-55 | 35691-55 | Sliding gear, countershaft - 26 T | usa | 95.00 | 79.83 | ||
| 35691-55used | 35691-55 | Sliding gear, countershaft - 26 T | usa | ||||
| 35720-53B | 35720-53B | Gear, countershaft - 19 T | usa | 80.00 | 67.22 | ||
| 35740-47 | 35740-47 | Thrust washer, countershaft high gear | usa | ||||
| 36045-47 | 36045-47 | Bushing, countershaft (36251-47) | usa | 13.00 | 10.92 | ||
| 36712-42 | 36712-42 | End, control cable | 3.00 | 2.52 |
Pages : [<< prev] 1 2 3 4 5 6 [next >>]
About the part numbers:
The number in the "Order #"-column is the number we need if you want to order the part.
The number in the "OEM #"-column is the "Original Equipment Manufacturer" number, the original part number.
From the Order number you can tell if it is an original or repro part: If the number begins with a letter it is a repro part. (usually a B for parts, an L for books, C for Colony kits, etc.)
Many items are listed without a price, this means they are in stock but you will have to ask for a price quote.
About Export price:
Price without sales tax, sales outside the EU