database

37 hits for
Model "ST 165" ... (all of these words)
in section "engine" ...

limit hits to section:
hardware engine inlet ignition transmission frame exhaust instruments misc. all

Display prices in ?
  Order # ? OEM # ? Description Finish Origin Price (EUR) Export (EUR)?
R    306-26 (    9261): Roller,  standard .250"  x  .600" R 306-26  9261  Roller, standard .250" x .600"  6.350 mm  usa  0.60  0.50 
R    306-26D (    9262): Roller,  oversize .250"  +.0002"  x .600" R 306-26D  9262  Roller, oversize .250" +.0002" x .600"  6.355 mm  usa  0.60  0.50 
R    306-26F (    9263): Roller,  oversize .250"  +.0004"  x .600" R 306-26F  9263  Roller, oversize .250" +.0004" x .600"  6.360 mm  usa  0.60  0.50 
R    306-26H (    9264): Roller,  oversize .250"  +.0006"  x .600" R 306-26H  9264  Roller, oversize .250" +.0006" x .600"  6.365 mm  usa  0.60  0.50 
R    306-26KA (    9265): Roller,  oversize .250"  +.0008"  x .600" R 306-26KA  9265  Roller, oversize .250" +.0008" x .600"  6.370 mm  usa  0.60  0.50 
R    306-26MA (    9266): Roller,  oversize .250"  +.0010"  x .600" R 306-26MA  9266  Roller, oversize .250" +.0010" x .600"  6.375 mm  usa  0.60  0.50 
    591-37A (  591-37A): Oil pump mounting bolt with washer 591-37A  591-37A  Oil pump mounting bolt with washer  park  usa  7.50  6.30 
16766-53  16766-53  Set of motor gaskets & oil seals      35.00  29.41 
16773-53A  16773-53A  Gasket, cylinder base         
16773-53B  16773-53B  Gasket, cylinder base    usa     
22001-53A  22001-53A/21986-59  Piston with rings and pin Std.         
22335-53  22335-53  Ring set, piston .005"      20.00  16.80 
22336-53  22336-53  Ring set, piston .010"      20.00  16.80 
22337-53  22337-53  Ring set, piston .020" (3 rings)      20.00  16.80 
22338-53  22338-53  Ring set, piston .030"      20.00  16.80 
22339-53  22339-53  Ring set, piston .040"      20.00  16.80 
22580-50  22580-50  Lock ring, piston pin    usa  1.20  1.00 
22586-53  22586-53  Piston pin Std.         
23730-47A  23730-47A  Plate, flywheel    usa  16.00  13.44 
23735-47A  23735-47A  Sprocket shaft - left side    usa     
23738-47A  23738-47A  Generator shaft - right side    usa  85.00  71.42 
23741-47  23741-47  Shim, flywheel shaft bearing .007"  .007"  usa  1.50  1.26 
23745-47  23745-47  Spring ring / Retaining ring, floating flange    usa  3.50  2.94 
23750-47  23750-47  Oil seal and retainer - sprocket shaft    usa     
23780-47  23780-47  Oil seal assembly, generator shaft    usa  25.00  21.00 
23785-48  23785-48  Oil seal, magneto shaft         
23787-47A  23787-47A  Gasket, oil seal / magneto, generator shaft seal         
24200-53  24200-53  Connecting rod, bearing and crank pin assy.    usa  145.00  121.84 
24251-53  24251-53  Crank pin - Std.    usa     
24574-47  24574-47  Tubular dowel, left crankcase    usa     
24811-53  24811-53  Stud, crankcase to cylinder         
25411-47  25411-47  Gasket, clutch cover    usa     
25451-47  25451-47  Screw, clutch cover - front 3"    usa  8.00  6.72 
25453-47  25453-47  Screw, clutch cover - center 2 5/16"    usa  4.00  3.36 
25705-47  25705-47  Inspection cover  zinc  usa  18.00  15.12 
25710-47A  25710-47A  Gasket, inspection cover    usa     
25715-47  25715-47 / 9851?  Zerk nipple, shift lever / spr.shaft nut/ front siren foot lever    usa  2.00  1.68 


[Jan Willem Boon Main Page]

generator, timer, starter, spark coil, spark plugs, ignition
chains, sprockets, transmission, clutch
exhaust systems
axles, brakes, rims, spokes, forks, steering dampers, stands, footboards, seat post, shock absorbers, luggage carrier, ride control, handlebars, windshields, chain guards, fenders, legshields, tanks, oil/gas lines
all
engine, oil pumps etc.
common screws, nuts, washers, rivets, bearings, rollers, wire terminals, clips, clamps, retaining rings, o-rings, grommets, oil seals
miscellaneous
batteries, speedometers, lamps, instrument panel, switches, electrical, sidecar, tools
inlet pipes, carburetor, air cleaner

About the part numbers:

The number in the "Order #"-column is the number we need if you want to order the part.
The number in the "OEM #"-column is the "Original Equipment Manufacturer" number, the original part number.

From the Order number you can tell if it is an original or repro part: If the number begins with a letter it is a repro part. (usually a B for parts, an L for books, C for Colony kits, etc.)
Many items are listed without a price, this means they are in stock but you will have to ask for a price quote.

About Export price:

Price without sales tax, sales outside the EU

Currency from 18-11-2008
Source: www.oanda.com