59 hits for
Model "Sprint" ... (all of these words)
in section "inlet" ...
| limit hits to section: | |||||||||
| hardware | engine | inlet | ignition | transmission | frame | exhaust | instruments | misc. | all |
| Order # ? | OEM # ? | Description | Finish | Origin | Price (EUR) | Export (EUR)? | |
| 27023-61M | 27023-61M | Manifold, intake 27 mm angled | usa | ||||
| 27023-61P | 27023-61P | Intake manifold | |||||
| 27047-67P | 27047-67P | Lockwasher, manifold screw 8 mm | 0.50 | 0.42 | |||
| 27048-62P | 27048-62P | Nut, intake manifold stud | 2.00 | 1.68 | |||
| 27063-57 | 27063-57 | Clamp, intake manifold / terminal block & flasher clip | usa | 16.50 | 13.86 | ||
| 27065-57 | 27065-57 | Buckle, exhaust pipe guard clamp / speedometer lamp | 5.00 | 4.20 | |||
| 27069-69P | 27069-69P | Gasket, intake manifold mounting | italy | 1.00 | 0.84 | ||
| 27070-67P | 27070-67P | Gasket, intake manifold | italy | 5.00 | 4.20 | ||
| 27070-69P | 27070-69P | Spacer, intake manifold mounting | italy | 6.00 | 5.04 | ||
| 27070-69PA | 27070-69PA | Gasket, intake manifold | italy | 2.00 | 1.68 | ||
| 27225-69P | 27225-69P | Starting jet - 0.70 mm | italy | 12.00 | 10.08 | ||
| 27388-62P | 27388-62P | Rubber cover, piston cap | italy | 15.00 | 12.60 | ||
| 27415-61P | 27415-61P | Gasket, intake manifold / Insulator block | italy | 14.00 | 11.76 | ||
| 27509-61P | 27509-61P | Screw, bowl cover / starting valve | italy | 0.75 | 0.63 | ||
| 27510-61P | 27510-61P | Gasket, bowl | italy | ||||
| 27514-66P | 27514-66P | Washer bowl cover screw | italy | 1.00 | 0.84 | ||
| 27536-61P | 27536-61P | Float valve | italy | 12.00 | 10.08 | ||
| 27537-61P | 27537-61P | Float lever | italy | ||||
| 27538-61P | 27538-61P | Pivot screw, float lever | italy | ||||
| 27540-61P | 27540-61P | Spring, float pin | italy | 3.00 | 2.52 | ||
| 27541-61P | 27541-61P | Lock ring, float pin | italy | 3.50 | 2.94 | ||
| 27580-61P | 27580-61P | Spring, throttle piston | italy | 2.00 | 1.68 | ||
| 27586-61P | 27586-61P | Nut, piston cap | |||||
| 27587-61P | 27587-61P | Stop screw, throttle piston | italy | 5.00 | 4.20 | ||
| 27588-61P | 27588-61P | Nut, throttle piston stop screw | italy | 1.50 | 1.26 | ||
| 27601-61P | 27601-61P | Gasket, gas strainer | italy | 1.00 | 0.84 | ||
| 27606-69P | 27606-69P | Low speed jet - .60 mm | |||||
| 27612-61P | 27612-61P | Metering pin | 16.00 | 13.44 | |||
| 27614-61P | 27614-61P | Retainer, metering pin | italy | 3.50 | 2.94 | ||
| 27618-65P | 27618-65P | High speed jet .56 mm | |||||
| 27619-61PA | 27619-61PA | High speed jet 1.00 mm - ( Sprint, used with air filter) | |||||
| 27620-61P | 27620-61P | High speed jet 1.08 mm | |||||
| 27630-61P | 27630-61P | Screw, idle mixture / Low speed needle valve | 11.00 | 9.24 | |||
| 27669-61P | 27669-61P | Hairpin spring - choke rod | 3.00 | 2.52 | |||
| 27677-71P | 27677-71P | Throttle piston / slide no. 50 ( 5.0 mm cutaway) | |||||
| 27695-69P | 27695-69P | High speed jet - 1.20 mm | 10.00 | 8.40 | |||
| 27700-69P | 27700-69P | Carburetor | |||||
| 27702-69P | 27702-69P | Throttle piston | |||||
| 27711-69P | 27711-69P | Starting jet .60 mm | italy | 21.00 | 17.64 | ||
| 27712-69P | 27712-69P | Low speed needle valve | italy | 21.00 | 17.64 | ||
| 27715-69P | 27715-69P | Float assy. | |||||
| 27716-69P | 27716-69P | Float pin | |||||
| 27723-69P | 27723-69P/27680-75P | O-ring, starter jet | italy | 1.50 | 1.26 | ||
| 27725-61P | 27725-61P | Adjusting screw, control cable | zinc | 5.00 | 4.20 | ||
| 27726-61P | 27726-61P | Nut, control cable adjusting screw | 1.00 | 0.84 | |||
| 27727-61P | 27727-61P | Clamp, intake pipe | |||||
| 27728-61P | 27728-61P | Screw, intake manifold clamp | 4.00 | 3.36 | |||
| 27739-69P | 27739-69P | Screw, inlet elbow | |||||
| 27748-71P | 27748-71P | Float | italy | 36.00 | 30.25 | ||
| R 27751-69P | 27751-69P | Rubber cap, front stoplight switch / control coil adj. screw | 2.00 | 1.68 | |||
| 27758-71P | 27758-71P/27724-76P | Screw, clamp | italy | 4.00 | 3.36 | ||
| 29029-73P | 29029-73P | Cover, air filter - with stud | |||||
| 29033-71 | 29033-71 | Air filter element - plastic foam (accessory) | 20.00 | 16.80 | |||
| 29036-63P | 29036-63P | Filter element | italy | 25.00 | 21.00 | ||
| 29044-61P | 29044-61P | Lock screw, air filter elbow | 1.00 | 0.84 | |||
| 29056-61P | 29056-61P | Air filter mesh | |||||
| 29056-62P | 29056-62P | Air filter mesh | italy | ||||
| 29071-67 | 29071-67 | Kit, air filter support | |||||
| 29080-68P | 29080-68P | Stud, filter element | 6.00 | 5.04 |
About the part numbers:
The number in the "Order #"-column is the number we need if you want to order the part.
The number in the "OEM #"-column is the "Original Equipment Manufacturer" number, the original part number.
From the Order number you can tell if it is an original or repro part: If the number begins with a letter it is a repro part. (usually a B for parts, an L for books, C for Colony kits, etc.)
Many items are listed without a price, this means they are in stock but you will have to ask for a price quote.
About Export price:
Price without sales tax, sales outside the EU