24 hits for
Model "Z-90" ... (all of these words)
in section "inlet" ...
| limit hits to section: | |||||||||
| hardware | engine | inlet | ignition | transmission | frame | exhaust | instruments | misc. | all |
| Order # ? | OEM # ? | Description | Finish | Origin | Price (EUR) | Export (EUR)? | |
| 27588-61P | 27588-61P | Nut, throttle piston stop screw | italy | 1.50 | 1.26 | ||
| 27591-66P | 27591-66P | Screw, inlet fitting | |||||
| 27592-70P | 27592-70P | Gasket, inlet fitting screw | 1.50 | 1.26 | |||
| 27604-73P | 27604-73P | Gas strainer | 11.00 | 9.24 | |||
| 27605-73P | 27605-73P | Gasket, inlet fitting | 1.50 | 1.26 | |||
| 27619-61PA | 27619-61PA | High speed jet 1.00 mm - ( Sprint, used with air filter) | |||||
| 27620-61P | 27620-61P | High speed jet 1.08 mm | |||||
| 27624-70P | 27624-70P | High speed jet .99 mm | 10.00 | 8.40 | |||
| 27626-68P | 27626-68P | High speed jet .95 mm | italy | 10.00 | 8.40 | ||
| 27626-70P | 27626-70P | High speed jet .85 mm | italy | 10.00 | 8.40 | ||
| 27627-68P | 27627-68P | High speed jet .92 mm | 10.00 | 8.40 | |||
| 27628-73P | 27628-73P | Screw, idle mixture | 6.00 | 5.04 | |||
| 27629-73P | 27629-73P | Spring, idle mixture screw | |||||
| 27643-73P | 27643-73P | High speed jet 1.15 mm | |||||
| 27725-61P | 27725-61P | Adjusting screw, control cable | zinc | 5.00 | 4.20 | ||
| 27750-73P | 27750-73P | Spring, throttle piston | 0.80 | 0.67 | |||
| R 27751-69P | 27751-69P | Rubber cap, front stoplight switch / control coil adj. screw | 2.00 | 1.68 | |||
| 27758-71P | 27758-71P/27724-76P | Screw, clamp | italy | 4.00 | 3.36 | ||
| 27759-73P | 27759-73P | Cover, throttle piston - with spring | |||||
| 27760-73P | 27760-73P | Gasket, throttle piston cover | |||||
| 27763-73P | 27763-73P | Float | italy | 18.00 | 15.12 | ||
| 27764-73P | 27764-73P | Pin, float | |||||
| 27770-73P | 27770-73P | Starting jet | italy | ||||
| 29075-68P | 29075-68P | Cover, air cleaner / cover, filter element | italy | 18.00 | 15.12 |
About the part numbers:
The number in the "Order #"-column is the number we need if you want to order the part.
The number in the "OEM #"-column is the "Original Equipment Manufacturer" number, the original part number.
From the Order number you can tell if it is an original or repro part: If the number begins with a letter it is a repro part. (usually a B for parts, an L for books, C for Colony kits, etc.)
Many items are listed without a price, this means they are in stock but you will have to ask for a price quote.
About Export price:
Price without sales tax, sales outside the EU